Filter
Top Products
● Prog. Swap (submenu)
Swap between two programs and their
channels. This can be done by pressing
Switch button after two different channels are
selected.
● Program
Display the current program’s channel
number
● Name
Rename the program with four colored
buttons on the remote control
for Capitalized English letters
for Alphanumeric numbers from 0 to 9
for special characters as “#”
Resuming “*” in unnamed mode
Use【VOL+】/【VOL- 】 to input and select the characters
Note: In PC signal mode, there are 2 options of Language and Child Lock in the Setup
menu. In AV/S-VIDEO/YPbPr signal mode, there are 3 options of Language,Blue Back
and Child Lock.
Ⅳ Tune
Press 【CH+ 】/【CH-】to select the Tune menu. There
are altogether 7 items to adjust: Auto Search,
Search, Band, Fine Tune, Color System, Sound
System and Skip.
● Auto Search
In Auto Search mode
1. The TV does auto-search and stores
programs from VHF-L to UHF.
2. During search, all programs searched are automatically stored.
3. When the search is done or when all 236-program positions are occupied, or you
have pressed 【MENU】during the search process, the search will halt and the TV will
return to the Tune menu with channel 1.
● Search
In Search mode, press【VOL+ 】/【VOL- 】
so that the TV manually searches the upper or lower
program position until one program was searched and automatic storage will commence. If
the program is not needed, then press【VOL+】/【VOL- 】again. After pressing 【MENU】, the TV
will exit from Search and return to the menu.
● Band
To set which band the current program belongs to.
● Fine Tune
In Fine Tune mode, press
【VOL+】/【VOL- 】
to until the best picture and sound is achieved. After
adjusting, the TV will auto-store the channels. Press 【MENU】to exit and return to the Tune
menu.
12
【1】
【2】
【4】
【3 】