Filter
Top Products
● Color System
To set the color system of the current program and use 【VOL+】/ 【VOL- 】
PAL, NTSC,N4.43, SECAM and Auto systems.
● Sound System
To switch between B/G,D/K,I, and M sound systems.
● Skip
Skipping the unwanted program can dramatically quicken program selection.
1. Turn Skip on, pressing【CH+】/【CH-】can not select this program.
2. Input the program number directly to locate the program.
Note: There is only Color System for the Tune Menu in AV, S-VIDEO signal sources. There
is PC Setup menu for the Tune menu in PC signal source. There is no Tune menu in YPbPr
signal source.
Ⅴ Clock
● Current Time
The current time can be set by using the
number buttons (0-9) or【VOL+】/【 VOL-】.
● On Time
The function of On Time can be effective when
On Mode is on. Press the number buttons or【VOL+】
/【VOL-】to set the time.
● On Mode
When this function is on, a preset time can be
programmed to turn on the TV.
● On Prog
To enter a selected program directly after Timer On is set.
● Off Time
The function of Off Time can be effective only when Off Mode is on. Press the number
buttons (0-9) or【VOL+】/【VOL-】to adjust the time.
● Off Mode
When this function is on, a preset time can be programmed to turn off the TV.
Note: The TV can only be turned on automatically when it is in standby mode. The Clock
menu is applicable in all signal sources.
Ⅵ PC Setup
● H Position
To adjust picture position horizontally.
● V Position
To adjust picture position vertically.
● Clock
To adjust picture clock position.
● Phase
To adjust picture phase.
● Color Temp
Four modes of Warm、Normal、Cool and User can be chosen with 【VOL+】/【VOL-】in cycle.
Only in User mode can adjustments be made to the three options: Red, Green and Blue.
to switch between
13