Polaroid FLM-2625 Flat Panel Television User Manual


 
23.Panel protection---The LCDpanel used in this productis made of glass.Therefore, it can break
when the product is dropped or impacted upon by other objects. Be careful not to be injured by
broken glasspieces in casethe LCD panelbreaks.
24.Pixel defect---The LCD panel is a very high technology product, giving you finely detailed pictures. Occasionally, a few non-active
pixels mayappear on thescreen as afixed point ofblue, green orred. Please notethat this doesnot affectthe performance ofyour product.
ImportantSafety Precautions (continued)
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE
NEC—NATIONAL ELECTRICAL CODE
<If an outside antenna is connectedto the television equipment, be sure the antenna system isgrounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to
proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding
conductors, locationof antenna-discharge unit,connection to groundingelectrodes, and requirementsfor the groundingelectrode.
<An outside antenna system should not be located in the vicinity of overhead power lines or other
electric light or power circuits, or where it can collide with such power lines or circuits. When
installing an outside antenna system, extreme care should be taken to keep from touching such
power linesor circuits, ascontact with themmight be fatal.
22. Powersource---This product isintended to besupplied by a listedpower supply indicatedon the markinglabel. If youare not sureof the
type of power supply to your home, consult your product dealer or local power company. For added protection for this product during a
lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the cable
system. This will prevent damage to the product due to lightning and power line surges. When the unit has to be used with another power
supply voltage, the power cable must be changed. Consult your product dealer. The socket outlet should be installed near the equipment
and easily accessible. Use only the power cord designated by our dealer to ensure safety and EMC. When connecting other products such
as VCRsand personal computers,you should turnoff thepower of theunit for protectionagainst electric shock.
4