Filter
Top Products
System Connections
Connecting to Audio/Video Sources
Move the switch “AV IN/OUT” to “IN” position on the right panel to put the unit into
audio/video input mode.
Use the audio cable to connect the AUDIO socket of your DVD player with the audio
output socket of external AV signal source.
Put one plug of the video cable into the VIDEO socket at the player’s side. Put the
other plug into the video output socket of external AV signal source.
Connecting to Power Adapter
The player is supplied with a switching power adapter. There are two ways to connect
to the power adapter.
• When using the additional LCD display: Connect the supplied adapter to the slot
marked with “DC12V In” on the side of the LCD display. Use the supplied power cord
to connect the jack marked with “DC12V Out” on the side of the LCD screen and the
jack marked with “DC12V In” on the side of the player. Then plug the two-prong end
of the power cord to an AC100-240V outlet. See the below figure:
13