Filter
Top Products
Basic operations of the
Remote control
15
Basic operations of the
Remote control
14
Channel Add/Del
1. Select “Channel Add/Del” sub item and press VOL up ( ) button to display “channel Add/Del” box as shown right figure.
2. Select the each desired channel with CH up/down( / ) button and choose Add or Del with VOL up/down ( / )
button.
3. Press MENU (■ )button to exit.
Fine Tuning
- Channel frequency can change due to the signal in your area. Use the “Fine Tuning” menu to get a better signal.
1. Select “Fine Tuning” menu, then press VOL up ( ) button to display”Fine Tuning” menu as shown in figure on
below.
2. Select the channel you wish to fine tune and adjust the frequency with the VOL up/down( / ) buttons
3. Press MENU (■ ) to exit.
Channel Add/Del
10
del add
ch : adj : exit :
Fine Tuning
10
0
-- +
ch : adj : exit :
Using the MENU
Press MENU button on the Remote control to display as below.
* Select the item with CH up/down ( / ) and enter the
subordinate items with VOL up ( ) button.
* Save and exit the(previous) menu with MENU (■)button.
Automatic Channel searching
1. Navigate to “Channel”, press VOL up ( ) button to enter the subordinate items.
(See above figure)
2. Press CH up/down ( / ) button to select “Air/Cable” item, and choose the
proper mode in “Air or Cable”item by using VOL up/down ( / ) button.
3. Move the item to “Channel Search... by pressing CH up/down( / )buttons
and press VOL up ( ) button to operate the automatic channel search.
(See right figure)
* Wait until the automatic channel search is completed. If you press MENU(■)button during channel search, you will not
add all available channels.
Changing the Channel
Method 1. Changing channels with CH up/down ( / )button on the Remote control.
AIR - Select channels 2 ~ 69 by pressing( / )buttons .
CABLE - Select channels 1 ~ 125 by pressing( / )buttons.
Method 2. Changing channels with digit buttons on the Remote control.
i) Selecting 1-digit channel: Press the “0” button followed by the channel you wish to view
ii) Selecting 2-digit channel: Press the first digit, then the second digit within 2 seconds
iii) Selecting 3-digit channel: Press the +100 button first, then the next two digits
*Selection channels, 1,70~125 with the( / )digit buttons only works in CATV mode.
move : enter : exit :
Channel Air/Cable Air Cable
Video Adj. Channel Search...
Sound Channel Add/Del...
Setup Fine Tuning...
move : enter : exit :
Channel Air/Cable Air Cable
Video Adj. Channel Search...
Sound Channel Add/Del...
Setup Fine Tuning...
move : enter : exit :
Channel Air/Cable Air Cable
Video Adj. Channel Search...
Sound Channel Add/Del...
Setup Fine Tuning...
Channel Searching
24
exit :
• About channel number colors:
- Channels with blue numbers on your TV screen are memorized channels found in the Auto Search
- Channels with red numbers on your TV screen are skipped by Auto Search or were deleted in the”Channel
Add/Del” menu
- Channels with pink numbers on your TV screen are channels that have been “fine tuned”
a5•˛ˆ •´ LCD2050-polaroid 03.7.2 2:28 PM ˘ ` 14 mac001 1200DPI 100LPI