Filter
Top Products
Chapter 2: Using the Remote Control
34
1. NUMBER BUTTONS
Selects channel numbers.
2. ON-OFF
Switches the set on or off.
3. SYSTEM
Configures the remote for TV1/TV2.
Configures the remote preamble (Bed 1/Bed 2) for use
with multi TVs in 1 room.
Press and hold <SYSTEM> and <1> key to set remote for
“Bed1”.
Press and hold <SYSTEM> and <2> key to set the remote
for “Bed2”. Refer to “Key Management”,”RCU type” in
Chapter 5.
4. RESET
Unused.
5. SKIP
Unused
6. SLEEP
Sets the sleep timer.
7. GUIDE
Display “Channel List” menu.
8. GO BACK
Return to the previous menu.
9. CC
Select the Caption menu directly.
10. VOL + / VOL -
Adjusts sound level.
CH + / CH -
Select a channel.
MUTE
Switches the sound on or off.
11. INPUT
Selects the TV, AV1, AV2, YPbPr, VGA, HDMI or USB
mode.
12. ANTENNA
Unused
13. MENU
Displays “Installer” on screen menu.
There are 2 remotes for this TV;
R130K1 - user Remote. This remote displays a basic user
menu when the menu key is pressed.
R130K2 - installer Remote. This remote displays an
installer menu when the menu key is pressed.
14. Navigational Controls
Adjusts menu settings.
Selects menu item.
15. OK
Accepts your selection.
16. INFO
Display the current channel information.
17. CLEAR
Exit from any OSD.
1 2 3
4 5 6
7 8 9
0
SYSTEM
GUIDESLEEPSKIP
CCGO BACK
ANTENNAINPUT
RESET
MENU OK INFO
CLEAR
MUTE
CH
VOL VOL
CH
ON-OFF
R130K2
MASTER
• Remove the battery compartment cover
from the back of the remote by pushing
the tab and lifting off the cover.
• Insert two fresh batteries. Make sure the
polarities (+ and -) are aligned correctly.
• Replace the cover.
Put Batteries in the Remote
The master remote control (R130K2) accesses all of the TV’s menus. It is used to customize the TV’s functional-
ity for specific users or specific situations.
Master(Installer) Remote
1
5
8
10
11
2
3
4
6
9
12
7
15
16
17
13
14
Chapter 2