Filter
Top Products
36 Chapter 5
Other Information
Menu Problems
• Menu access may be blocked by ClonePRO programming.
• Try unplugging the TV for two minutes and then plug it back in and turn it on.
• The Energy Saver settings won’t work if the
TV Power is set to On Always in the Access & Power Options menu.
• The basic menu options might be restricted by master menu settings.
• The ClonePRO might have disabled master menus.
• Sleep and Schedule functions won’t work if the
TV Power is set to On Always.
Care and Cleaning
CAUTION: Turn OFF your TV before cleaning.
You can clean the TV as required, using a soft lint-free cloth. Be sure to occasionally dust the ventilation slots in the cabinet to help
assure adequate ventilation.
The TV’s screen may be cleaned with a soft, lint-free cloth as well. Take care not to scratch or mar the screen. If necessary,
you may use a cloth dampened with warm water. Never use strong cleaning agents, such as ammonia-based cleaners, or
abrasive powder. These types of cleaners will damage the TV.
While cleaning do not spray liquid directly on the screen, or allow liquid to run down the screen and inside the TV. Also, avoid placing drinks
or vases with water on top of the TV. This could increase the risk of fire or shock hazard or damage to the TV.
Caution: Using video games or any external accessory with fixed images for extended periods of time can cause them to be permanently
imprinted on the picture tube (or projection TV picture tubes). ALSO, some network/program logos, phone numbers, etc. may cause
similar damage. This damage is not covered by your warranty.
1644105Ae.indb 36 7/18/05 2:27:53 PM