Filter
Top Products
Connections & Setup
Chapter 1 7
VIDEO 2 (Model J32F635 only)
VIDEO, AUDIO R and L/MONO and Y, Pb, Pr INPUTS Let you connect a second
component video source, such as a DVD player.
• Y, Pb, Pr Provide optimum picture quality because the video is separated into three
signals. Use three video-grade cables for the connection. When using Y, Pb, Pr, make
sure to connect left and right audio cables to the VIDEO 2 AUDIO Input jacks.
• R and L/MONO AUDIO and VIDEO Their description is the same as VIDEO 1.
MONITOR OUT
AUDIO/VIDEO OUTPUTS Allow connection of external audio amplifiers, power
speakers, audio receivers for improved sound quality or an external video monitor with
the use of VIDEO OUT. Please note that these outputs cannot drive standard speakers
directly.
DSCI PORT This port is used to transfer information between a TV and other devices,
such as a clone box or interactive system. This port is an eight-pin telephone-type port.
When the TV receives a message via the DSCI (digital serial communications interface)
port, it will act in accordance with the digital instructions received. For more information
on its connection and operation, please contact your distributor or the supplier of the
interactive system.
EXTERNAL SPEAKERS These jacks are used to connect your TV to a mono speaker. If
you want to deliver TV audio into another room, connect the external speaker directly to
the TV using class 2 speaker wire.
Note: Speakers should have a minimum of 16 ohms impedance.
DSCI
Port
TV ANT
DSCI
Port
TV ANT
S-Video Jack
Audio/Video Jacks
TV ANT
Digital Audio
Out Jack
Phone Jacks
Y P
B
P
R
DSCI
Port
TV ANT
DSCI
Port
TV ANT
DSCI
Port
TV ANT
1644105Ae.indb 7 7/18/05 2:27:05 PM