Chapter 1: Connections and Setup
17Chapter 1
Note
- Screw length needed depends on the wall mount used. For further information, refer to the VESA Wall
Mounting Instruction Guide.
Vesa Standard TV Mounts - 22/26 inches
To the right are some examples of VESA standard
mounts. Since there are numerous types of stands
and mounts available, only a few are shown here.
Refer to the instructions provided with the TV
stand that will be used to mount the TV. Be sure
the style of stand selected is capable of supporting
the weight of the TV and is appropriate for the
application.
General Guidelines: Choosing a Location for
installing a VESA Standard Mount
If the mount will be on a wall, a typical wooden
stud behind the wall board would be the pre-
ferred choice for a location to attach the wall
mount. The wall mount location chosen should be
appropriate for drilling holes and have available
the required power source as well as
antenna/cable and any other equipment leads as
necessary.
Wall Mounts
A sturdy surface on a desk or other similar flat
table-like furniture would be the appropriate loca-
tion for mounting a pedestal-style TV stand.
Most stands are designed so that the wiring is
threaded through the stand itself or a
loopthrough style clamp so that the wiring is neat-
ly bunched and not strung in such a way as to cre-
ate a potential hazard to the user.
(Some stands are portable and can be moved from
one location to another.) Be sure all safety consid-
erations are followed.
Pedestal Mounts and Stands
Typical Wall Standard Type Mount
with Swivel Bracket
Typical Pedestal Type Mount with
Swivel Bracket
Caution: Tightening wall mount screws that are too long could cause damage to the internal components of
this television.
Use M4 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.3 inch or below for
J22HE820)
Use M5 X “L” bolts to mount LED. (“L” = Wall Mount bracket thickness + 0.3 inch or below for
J26HE820)
You must use a UL listed wall mount or the DTI Services, LLC DTI-006 Wall Mount Bracket whenever Wall
Mounting this television.
A skilled person should be contacted to perform the installation of the television and wall mount.
Specification of a generic "UL Listed wall mount" should additionally include : minimum weight that the
mount must be able to support, minimum screen size that the mount must be able to support, instructions
furnished as part of the wall mount must be closely followed, the wall mount must be suitable to support
the type of television under consideration.