Filter
Top Products
Using TV Menu Chapter 4 39
If available, lets you select the captioning mode used for displaying
captioning information. If you are unsure of the differences among the modes, you may
prefer to leave the closed captioned mode set to CC1, which displays complete text of the
program in the primary language in your area.
If available, lets you select a closed caption service mode (1.6) for digital
channels.
If available, lets you select between
and options.
changes according to what you set for the options below.
Lets you choose the color of the digital closed-caption text:
or
Lets you choose the color of the area of the screen behind the
digital closed-caption text:
.
If available, lets you customize the following display options:
Lets you set the appearance of the digital closed-caption text:
S
or
Lets you set the area of the screen behind the digital
closed-caption text :
or
Lets you choose the edge color of the digital closed-caption
text:
or
Lets you choose the edge type of the digital closed-caption
text:
.
Lets you set the size of the digital closed-caption text. You can choose
or .
Lets you select a character design for the digital closed-caption text.
A font is a complete assortment of letters, numbers, punctuation marks, etc. in a given
design. You can choose from a variety of fonts (
).
Lets you select your preferred language for the menus:
or
.
If you choose On, this feature is activated.
• When activated, this feature monitors the ambient light conditions in the room and adjusts
the TV’s backlight for optimum viewing. It also serves as an energy saving feature by lowering
the backlight power level when appropriate (typically in darker room conditions).
• The TV has a multi-colored LED that adjusts based on the backlight power level with “green”
representing the highest level of energy savings. Please refer to the table at the left for the various
conditions of the backlight power level and LED colors when the light sensor is active.
The Auto Tuning menu was explained in Chapter 3. Go to page 30 for more
information.
Time Menu
If you didn't set the time reference channel, enter the current time manually.
Press OK to start input, press left and right arrow buttons to select the input space, then use
up and down arrow buttons to set hours, minutes and AM/PM. Press OK to finish input.
Choose a station to have the TV set the time for you. Wait about one
minute for the time to be set.
Use the left and right arrow keys to set the TV to turn off after a given amount of time.
Select the current local time among
,
Choose between and modes.
Digital CC Style
Go Back
Digital CC opacity Solid
Digital CC Back. opacity Flashing
Digital CC Edge Color Black
Digital CC Edge Type None
Digital CC Size Standard
Digital CC font Semi Serif
<L/R>: Select
Time
Go Back
Entry Time --:--
<OK>: Start/Finish Edit
Auto Time Channel A2
Sleep Timer OFF Z
Z
Z
Time Zone Samoa
Daylight Saving Automatic
TV mode
Backlight
Power Level
LED Color
Standby
Off
Off
On
Full Power Level
Blue
On
Mid Power Level
Cyan
On
Low Power Level
Green