Filter
Top Products
Menus and Features
31
MAIN MENU
1 Audio...
2 Picture Quality...
3 Screen...
4 Channel...
5 Set Time...
6 Parental Controls...
7 GUIDE Plus+ Menu
0 Go Back
Channel Menu
Signal Type Displays a choice list that lets you select the current
antenna type. Note that if you have set up the GUIDE Plus+ System,
Signal Type does not appear in the Channel menu.
UHF/VHF Antenna Choose this if you are currently using an off-air
antenna for TV signals.
Cable TV Choose this if you are currently using cable or a cable box
for TV signals.
Auto Channel Search Tells the monitor to search automatically for all
the channels available through the antenna input. When the monitor
finds an active channel, it places it in the channel list; inactive channels
(weak stations or channels with no signal at all) will be removed from
the channel list. Video Input channels can also be added later in the List
and Labels control panel. Note that if you have set up the GUIDE Plus+
System and specified that you are using a cable box, Auto Channel
Search does not appear in the Channel menu.
List and Labels Displays a control panel that lets you custom-build
your channel list and choose a six-character label for up to 45 channels.
Follow the on-screen directions to enter your channels and other
information.
Channel Number Use the up and down arrows to scroll up and
down through the channel scan list. You can enter the channel
number directly using the number buttons.
Channel List Only the channels included in the Normal list are
available when you scan up and down using the CH buttons. Use the
up and down arrows to indicate whether the channel number
indicated is included (Yes) or is not included (No) in the Normal
channel list.
Channel Labels You can enter a six-character label for up to 45
channels. Use the CH ^ (channel up) or CH v (channel down) buttons
to change channels in the Channel Number field. This works even if
you’re not in the Channel Number field. Or, enter the channel
number directly using the number buttons on the universal remote.
To enter a number greater than 99, press and hold “1” to enter the
hundreds digit, then press the two remaining numbers. The List and
Labels feature can also be accessed from the Channel menu. Because
this procedure can be time consuming, feel free to skip this step and
come back to it later.
1. Use the left and right arrows to point to the three different areas of
the control panel (called “fields”).
2. Use the up and down arrows to scroll through the numbers (or use
the digit keys on the remote) and letters and select Yes or No in the
Channel List field. You may wish to refer to the TV station call letters
listed in your newspaper’s TV section for ideas on labelling the
channels.
3. Repeat this process for each of your channels. Then press MENU or
OK to continue. The monitor can store in memory as many as 45
labels.
LIST AND LABELS
Channel Channel Channel
Number List Label
59 Yes FOX---
Use ^ or v, keypad, or CH ^/v
to set channel, OK to exit.
CHANNEL
1 Signal Type...
2
Auto Channel Search
3 List and Labels...
4 Autotuning...
0 Go Back