Filter
Top Products
Viewfinder playback is a way to watch tapes in black and white using the camcorder. To hear the sound on
the tape, connect an optional earphone to the earphone O jack.
Earphone Jack (Located on side)
EJECT Button (Located under
cassette compartment cover)
POWER (CAM/OFF/PLA Y)
REW (Rewind)
Still (ll) Button
F.FWD. Button
PLAY Button
STOP Button
To play back a tape through the viewfinder.
1. Slide the POWER switch to PLAY.
2. Insert the cassette you want to play back.
3. Press the PLAY button.
• During playback, press the still (ll) button to
"stop the action" and view one frame of the tape.
Press the still (ll) button again (or the PLAY
button) to return to normal playback.
Caution: Still is designed for momentary
interruptions and should not be used for an
extended period of time. If the camcorder
remains in the still mode for more than five
minutes, it will automatically move the tape
away from the spinning heads to prevent
excessive tape wear.
• During playback, press and hold the F.FWD.
(fast forward) or REW (rewind) button if you
want to visually search the tape in forward or
reverse. Release the button to return to normal
playback.
4. Press the STOP button when you are finished.
Notes: The corresponding buttons on the remote control
will operate the camcorder.
The camcorder can play back tapes recorded in SP or LP
speed. The LP indicator appears in the electronic
viewfinder when an LP tape is being played.
During still and search operations, it is normal for streaks
to appear in the picture.
The sound is muted during special playback operations.
31