RCA RLEDV2490A Flat Panel Television User Manual


 
35
36
Ohters Menu
Clock
Daylight Saving Time
Move
:Return
Time Zone Hawaii/Alaska /Central/Mountain/ Samoa/Newfounland/
Altantic Set the time zone.
Auto Clock
If set it to ON , the TV will sync the local clock according to the DTV broadcasting
time automatically. Otherwise you can set the time manually.
Setup Time
Set Auto Clock to Off, then you can set the time manually .
Note: In the case of loss of power, the clock setting will be lost.
Day of Week
The TV will calculate current day of week according to the time.
Daylight Saving Time
When Auto Clock set to ON, this item is available to enable daylight saving option
or not.
/Pacific Eastern/
: Move
Blue Back
Set the screen background color blue or not when no valid signal input. When analog
TV input and has no signal, snow noise will display if this option is cleared.
No Signal Power Off
If it is set, TV will automatically enter standby after 10 minutes without signal input.
No Operation Power Off
If it is set, TV will enter standby after 3 hours without any operation.
All Reset
When you highlight the item, the system will note you that”Attention! If [All Reset]
was executed, TV system is reset” and if you are sure to reset, press ENTER
Audio Only
When you highlight the item, the system will note you that “ Hold on
ower key 3 second to restore video”, and if you are sure not need to view
(backlight is turned off), press ENTER to confirm
automatically
to reset .
Attention!
. As the attention, if you want to
wake up the video, please hold on the power button for 3 seconds.
Adjust the OSD Screen
OSD Menu Operations OSD Menu Operations
Adjust the OSD Screen