Filter
Top Products
- 24 -
3.
Press or button to select Wired, then press OK
button. The IP Settings screen appears. If the network
connection is active, Link Up appears next to Link
Status. If the network connection is not active, Link
Down displays next to Link Status.
4. Press
or button to select IP Mode, then
press OK button.
5. Press or button to select an IP Mode. You
can select:
• Dynamic — Uses DHCP to automatically obtain
an IP address.
• Manual — Lets you manually confi gure network
settings, such as IP address, subnet mask, and
gateway settings.
• O — Disables the network interface.
6. Press or EXIT button to go to the previous
menu.
Network Test
Selecting the Network Test will cause the player to
attempt to communicate with your home network,
and if successful, with a known internet address.
If both attempts are successful, your network
connection should be good. If the player can
successfully connect to your home network, but not
to the known internet address, your internet service
may be “down”, or your security fi rewall may be
blocking access of the player to the internet.
Network Setting
1. In the main menu of Settings, press button,
then use or button to select Network.
2. Press button.
2. Press
button and press or button to select
an option, then press OK button.
3. Press or buttons to select the desired
option, and then press OK button to confi rm
your selection.
4. Press
or EXIT button to go to the previous
menu.
Optical Disc AutoPlay
If On is selected, the player will play a disc automatically
when the unit is turned on, or if you press the BD/USB
button.
Screen Saver Duration
This Blu-ray disc player has a screen saver feature
when your player is inactive. You can set the interval
time you want your player to wait before activating
the screen saver.
System Setting
1. In the main menu of Settings, press button,
then use or button to select System.
IP Settings
Link Status
MAC Address
IP Mode
IP Address
Subnet Mask
Gateway
Primary DNS
Secondary DNS
Link Down
xx:xx:xx:xx:xx:xx
Dynamic
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
0.0.0.0
Apply
Cancel
The Settings Menu
Auto Power Down
This power-saving option defi nes the time duration
upon which the unit shuts down automatically as a
result of inactivity.
Restore Factory Defaults
If you choose OK in the prompt message box, all
settings will be restored to the factory defaults.
Update Via Network
This option allows to update your product software
via the internet.
Info Setting
1. In the main menu of Settings, press button,
then use
or button to select Info.
2. Press
button to display the related information.