Filter
Top Products
24
Recording a Program
Express Recording
Express recording lets you record up to four hours or to the end of the tape without programming
the timer. You can begin recording immediately. The TV/VCR will stop automatically at the end
of the recording.
S
K
I
P
S
P
E
E
D
OFF
REW PLAY FF
REC STOP PAUSE
DISPLAY
SLEEP
MUTE
PREV
1 2 3
4 5 6
7 8 9
0
TRACK F.ADV
CLEAR MENU RESET
-
TV
VCR
+
C
H
A
N
V
O
L
C
H
A
N
V
O
L
S
E
A
R
C
H
How to Use Express Recording
1. Insert a tape with safety tab in place.
The TV/VCR will turn on.
2. Select the channel to be recorded.
To record from the AUDIO/VIDEO IN jacks, press
INPUT. Two selections appear in the channel field. Press
1 to select VIDEO 1, the rear AUDIO/VIDEO IN jacks.
Press 2 to select the front panel AUDIO/VIDEO IN jacks.
3. Press SPEED to select a recording speed.
You can also change the speed of the recording
in progress.
4. Press REC twice to activate express recording.
5. Press REC repeatedly until the desired amount of
recording time is displayed.
Each time you press REC, the recording time increases
as shown below:
The TIMER REC indicator on the TV/VCR’s front panel
will light during express recording.
During express recording, press REC to display the time
remaining on the screen. Press REC again to increase the
recording time.
Stopping an Express Recording in Progress
Press and hold STOP/EJECT on the TV/VCR or STOP on
the remote to stop the express recording.
— OR —
Repeatedly press REC until RECORD LENGTH: 0:00
appears. The recording stops after a few seconds.
Display
Press Recording
REC Time
0:30 (30 Min)
1:00 (1 Hr)
1:30 (1 Hr, 30 Min)
2:00 (2 Hrs)
3:00 (3 Hrs)
4:00 (4 Hrs)
0:00:00 (Normal Record)
0:00 (Turns Off)
RECORD LENGTH 0:00
Ch 04
Press REC to set length