Filter
Top Products
7
Using the Remote Control
Buttons
SKIP/SEARCH
Operates Commercial Skip during TV
viewing. (This only works when there is
no tape in the TV/VCR.)
Displays INDEX, ZERO, and BLANK
search screens when tape is inserted
in the TV/VCR.
Operates Commercial Scan by advancing
tape 60 seconds during playback.
SLEEP
Sets TV/VCR to automatically turn off in
30, 60, 90, or 120 minutes. See page 10.
SPEED (Tape Speed)
Selects a recording speed (SLP, SP, or LP).
STOP
Stops functions such as record, play,
rewind, fast forward, and pause.
TRACK
+ and –
(Tracking up and down)
Lets you manually adjust tracking to
reduce the streaks that may appear in the
picture during playback.
TV
Turns on the TV/VCR.
VCR
Turns on the TV/VCR.
VOL < and > (Volume up and down)
Raises and lowers sound.
Numbers (0 through 9)
Select a channel up to 99 by pressing
two numbers.
Select a cable channel over 99 by pressing
and holding 1 until 1– – appears on the
screen. Then press the other two numbers.
OFF
Turns the TV/VCR off.
PAUSE
Pauses the tape during playback.
Pauses the tape during recording to
prevent recording of unwanted scenes.
PLAY
Plays a tape.
PREV (Previous channel)
Switches between the last two channels
selected.
Select one channel and then select the
other using the number buttons. Press
PREV to switch between the two
channels.
REC (Record)
Starts TV/VCR recording.
Used for express recording.
RESET
Resets video functions to factory settings.
Used to reset time for wake-up timer and
alarm.
REW (Rewind)
Rewinds the tape when the TV/VCR
is stopped.
Searches the picture in reverse during
playback.