Filter
Top Products
9
Setting Up the VCR
Startup
7. Select the language.
The VCR displays the on-screen menus in the English, Spanish, or
French language. The word ÒLanguageÓ cycles through the
different languages when the VCR MAIN MENU is displayed on the
TV screen.
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 7 to display the LANGUAGE, IDIOMA or LANGUE menu.
The arrow indicates which language is selected.
¥ Press 1 to have the menus displayed in English (Ingles).
¥ Press 2 to have the menus displayed in Spanish (Espa–ol).
¥ Press 3 to have the menus displayed in French (Fran•ais).
8. Set the automatic daylight-saving time.
Select this feature if you want the VCRÕs clock to advance
automatically one hour in April and reverse one hour in October.
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 3 to display the TIME menu.
C. Press 2 to switch AUTO DST between ON and OFF.
¥ Select ON if you want the VCRÕs clock to automatically adjust
for Daylight Saving Time.
¥ Select OFF if you do not want the VCRÕs clock to
automatically adjust for Daylight Saving Time.
In the Spring, daylight-saving time begins on the first
Sunday in April. Because the clock automatically changes
from 2:00 AM to 3:00 AM (forward one hour), remember that
any part of a scheduled Timer Recording that falls between
these two times will not be recorded.
In the autumn, daylight-saving time ends on the last Sunday
in October. The VCR clock automatically changes from 2:00
AM to 1:00 AM (back one hour). Therefore, it can affect your
recording length.
9. Set the time and date.
The time does not appear in the display panel until the clock is set.
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 3 to display the TIME menu.
C. Press 1 to display the SET TIME AND DATE.
D. Use the number buttons on the remote to enter the time
including AM or PM, month, day, and year. The day of the week
will automatically appear after you enter the year.
¥ Press 0 before single-digit numbers. Press 1 for AM or 2 for
PM.
Example: press 0, then 5, then 0, then 7, then 2 for a time of
5:07 PM.
¥ Press CLEAR on the remote at any time to change incorrect
entries.
E. Press MENU to set the clock.
F. Press 0 to exit the menus.
The time appears in the VCRÕs display panel. To display the
time and date on the screen, press DISP on the remote.
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
5 PREFERENCES
6 AUDIO
7 LANGUAGES
LANGUAGE
SELECT A LANGUAGE.
1➛ENGLISH
2 ESPAÑOL
3 FRANÇAIS
PRESS MENU TO CONTINUE
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
TIME
1 SET TIME AND DATE
2 AUTO DST: ON
0 EXIT
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
TIME
1 SET TIME AND DATE
SET TIME AND DATE
TIME --:--
(HH:MM)
DATE --/--/--
SET TIME AND DATE
TIME 02:30 PM
(HH:MM)
DATE 08/04/96 SUNDAY
PRESS CLEAR TO CORRECT
PRESS MENU TO SET