Filter
Top Products
29
Recording a Program
Checking or Clearing VCR Plus+ or Timer Recordings
1. Press MENU on the remote to display the VCR MAIN
MENU.
2. Press 2 to display the TIMER RECORDINGS menu.
3. Press 2 to display the REVIEW EXISTING PROGS menu.
Each entered program is displayed for a few seconds in
sequence.
4. Press MENU for next program or CLEAR to erase the
program.
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the VCRÕs
AUDIO and VIDEO IN jacks. Recording from the line input is
convenient if you have a satellite receiver or similar
component attached to these jacks.
To timer record from the component connected to the VCRÕs
line input, press INPUT on the remote to enter VIDEO instead
of the channel number on the TV screen during timer
programming.
Recording While You’re Away (Timer Recording)
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO
START TIME --:--
END TIME --:--
START DATE --/--/--
TAPE SPEED SLP
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
PROGRAM 1 (ONE TIME)
CHANNEL 08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 02/02/96 FRI
TAPE SPEED SLP
PRESS CLEAR TO DELETE
PRESS MENU FOR NEXT PROG