Filter
Top Products
33
Front Panel
Back Panel
References
Location of Controls
CHANNEL or TRACKING up or down
Selects next higher or lower channel in the VCRÕs
channel memory.
Adjusts tracking during playback.
FWD (Fast-Forward)
Fast-forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
PLAY•PAUSE
Plays a tape.
Pauses the tape for stop-action viewing during
playback.
Pauses the tape during recording to prevent
recording unwanted material.
POWER
Turns the VCR on or off.
RECORD
Starts the VCR recording.
Used for one touch recording.
Remote Sensor
Receives signals from the remote control.
Aim the remote at this sensor with no objects
between them.
REW (Rewind)
Rewinds the tape when the VCR is stopped.
Searches the picture in reverse during playback.
STOP•EJECT
Stops the VCRÕs normal functions such as record,
playback, rewind, fast-forward, or pause.
Ejects the cassette when the VCR is stopped.
TV•VCR
Switches the picture signal so that it either comes
from the VCR or the TV channel.
3CH.4 Switch
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
IN FROM ANT. (Antenna) Connector
Receives a signal from an antenna or cable system
when attached.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
VIDEO1 IN and AUDIO1 IN Jacks
Receives signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use
INPUT (channel 00) on the remote to
select.
VIDEO1 OUT and AUDIO1 OUT Jacks
Sends signals from VCR to another component like
a TV, VCR, or camcorder when it is connected to
these jacks.
OUT TO TV
IN FROM
ANT.
VHF/UHF
3 CH. 4
IN
AUDIO1
VIDEO1
R
L
OUT
REW PLAY•PAUSE FWDRECORDPOWER
TV•VCR
CHANNEL
TRACKING
STOP•EJECT
VCR
A
M
Remote Sensor
Tape Compartment