Filter
Top Products
15
Playback
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input
to see the picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on and the VCR indicator lights.
The VCR automatically begins playback if the safety tab on the
tape has been removed and the AUTO PLAY feature is turned on.
3. Press PLAY•PAUSE on the VCR or PLAY on the remote or VCR,
if necessary.
4. Press TRACKING up or down on the remote or the VCR to
remove any streaks from the picture if necessary.
See ÒManual
TrackingÓ section.
5. Press STOP•EJECT on the VCR or STOP on the remote to stop
the tape.
6. Press REW on the VCR or the remote to rewind the tape.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of
the tape during playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off
automatically when it is completely rewound.
7. Press STOP•EJECT on the VCR to eject the tape once it is
completely rewound.
AUTO PLAY Feature
This feature allows the VCR to automatically start playing when you insert a tape with the safety
tab removed.
1. Press MENU on the remote to display the VCR MAIN MENU.
2. Press 5 to display the PREFERENCES menu.
3. Press 2 to select AUTO PLAY: ON or OFF.
¥ Select ON if you want to have a tape with its safety tab
removed to start playing automatically.
¥ Select OFF if you
do not want a tape with its safety tab
removed to start playing automatically.
Playing a Tape
REW PLAY•PAUSE FWDRECORDPOWER
TV•VCR
CHANNEL
TRACKING
STOP•EJECT
VCR
A
M
Safety Tab
VCR MAIN MENU
1 VCR PLUS+
2 TIMER RECORDINGS
3 TIME
4 CHANNELS
5 PREFERENCES
PREFERENCES
1 REMOTE CONTROL: VCR1
2 AUTO PLAY: ON
3 FRONT PANEL: AUTO
4 ALERT SOUND: OFF
5 CA MARKING: OFF
6 CA PLAYBACK: AUTO
7 CA DISPLAY: BLUE
0 EXIT