Rotel RDV-1093 DVD Player User Manual


 
28
RDV-1093 DVD Audio/Video Player
Picture
Picture is noisy.
The player is connected to a VCR directly
and the copy guard function is activated.
Connect the player directly to the TV.
Cannot get correct picture on TV.
Connect the RDV-1093 to the TV with the
correct kind of cable.
Make sure that the Video Output setting
matches the correct resolution of your TV.
You cannot display progressive scan video
on standard definition TVs.
Make sure that the PAL/NTSC setting
matches your TV.
Picture does not fill screen.
Set ASPECT RATIO correctly.
HDMI LED flashing continuously and no
picture.
HDMI components must be Ver. 1.1 compat
-
ible.
HDMI cables must be 5 meters or less in
length.
No picture at Component video.
Most DVD Video discs are Macrovision,
HDCP compliant. Set the Output format of
High Definition setup change to Progressive
(480p/576p) or interlace (480i/576i).
Audio
No sound.
Check the audio cable connection and input
settings on preamplifier.
Garbled sound.
Clean the disc surface.
Specifications
General
Readable discs:
DVD-Audio, DVD-Video, Audio CD, MP3 in CD-R/
RW, DVD-/+R
Video format:
PAL or NTSC. 480i/576i, 480p/576p, 720p,
1080i, 1080p.
Other
Power requirements:
AC 110-240 V, 50/60 Hz
Power consumption:
26 W
Weight:
5.1 kg (11.2 lbs)
Dimensions (W x H x D):
432 mm x 92 mm x 336 mm
17.01” x 3.62” x 13.23”
Front Panel Height
(feet removed/for rack mount)
80 mm/3.15”
Video output
COMPONENT (pin jack):
Y Output: 1.0 Vp-p (75 ohm)
PB/PR Output: 0.7 Vp-p (75 ohm)
VIDEO OUT (pin jack):
1.0 Vp-p (75 ohm)
S-VIDEO OUT (S jack):
Y Output: 1.0 Vp-p (75 ohm)
C Output (NTSC): 286 mVp-p (ohm)
C Output (PAL): 300 mVp-p (75 ohm)
HDMI:
Version 1.1
Signal to noise ratio:
65 dB
Audio output
Analog Out (pin jack):
2.0 Vrms (220 ohms)
Digital Out:
Optical: –21dBm to –15dBm (Peak)
Coaxial: 0.5 Vp-p (75 ohm)
Audio characteristics
Frequency response:
CD (at 44.1 kHz): 2 Hz to 20 kHz
DVD (at 48 kHz): 2 Hz to 22 kHz
DVD (at 96/88.2 kHz): 2 Hz to 44 kHz
DVD (at 192/176.4 kHz) : 2 Hz to 88 kHz
Dynamic range:
16 bit: more than 100 dB
20 bit: more than 110 dB
24 bit: more than 110 dB
Wow and flutter:
Unmeasurable (less than ± 0.002%)
Total harmonic distortion:
16 bit: less than 0.0018%
20/24 bit: less than 0.0012%
All specifications are accurate at the time of print-
ing.
Rotel reserves the right to make improvements
without notice.
Rotel and the Rotel HiFi logo are registered trade
-
marks of The Rotel Co, Ltd., Tokyo, Japan.