Filter
Top Products
12
RDV-985 DVD Player
Using Numeric Buttons
13
Selecting Track/Title Numbers
To select a number between “1” and “10” press
the corresponding button for the number.
To select a number higher than 10 use the
“+10” button.
Examples:
To select 13 +10 3
To select 34 +10 +10 +10 4
To select 40 +10 +10 +10 10
Entering a Time or Chapter
Number
The method for entering a time for Time search
or chapter number for Chapter search is dif-
ferent from above. See the corresponding
sections in this manual for the details.
To select a TV channel.
Press the corresponding numeric buttons (be-
tween 0 and 9) while holding down the SHIFT
button.
About discs
Playable Disc Types
This unit can play the following types of discs:
DVD Video
TM
Video CD
VIDEO CD
SVCD
Audio CD
All DVD players and DVD discs have a Re-
gion Code number. This unit only can play
back DVD discs whose Region Code numbers
include the unit’s Region Code, which is in-
dicated on the region code symbol on the rear
panel.
Examples of playable DVD discs for a unit with
Region Code “1”
NOTE: With some DVD and Video CD
discs, you may not be able to control them
according to the instructions described in
this manual, because of the contents of the
disc.
Non-Playable Discs
DVD-ROM, DVD-RAM, DVD Audio, DVD-R,
DVD-RW, CD-R, CD-ROM, PHOTO CD, CD-
RW, CD-EXTRA, CD-G, CD-TEXT
This unit can play back
audio
recorded on
CD-G, CD-EXTRA and CD-TEXT discs.
NOTE: Playing back discs listed as “Non-
playable discs” in the table above may
generate noise and damage speakers.
DVD Disc Structure
A DVD disc is comprised of “titles,” while an
Audio CD, Video CD or SVCD is comprised
of “tracks.” Each title may be divided into some
“chapters.” For example, if a DVD disc con-
tains some movies, each movie may have its
own title number, and each movie may be
divided into some chapters. In a DVD karaoke
disc, each song usually has its own title number
and does not have chapters.
Chapter 1 Chapter 2 Chapter 3 Chapter 1 Chapter 2
Title 1
Example: DVD Disc
Example: Audio CD / Video CD / SVCD Disc
Title 2
Track 1 Track 2 Track 3 Track 4
Getting Started
Most of the time you will be operating the
RDV-985 with the RR-DV91 remote control.
The front cover of this manual folds out so you
can see the control identification diagram on
page 4 while reading the operating informa-
tion on the following pages.
Power On/Off
Press DVD ON/OFF
18
on the remote or the
STANDBY
button on the front panel.
You can also turn on the unit by pressing the
PLAY button on the front panel
or the Re-
mote control
20
. If a disc is loaded the RDV-
985 will start playing. If a disc is not loaded,
the disc tray opens.
You can also turn on the unit by pressing the
OPEN/CLOSE button on the front panel
or the remote control
2
. In this case, the
disc tray opens.
NOTE: When you turn off the RDV-985 it
is not disconnected from the AC power
source. It goes into a standby state. In this
state, the unit consumes a very small quan-
tity of power.
Loading Discs
Press the OPEN/CLOSE button on the front
panel
or the remote control
2
. Place
a disc in the disc tray with the label side up.
Press one of the OPEN/CLOSE buttons to close
the tray.
You can also open and close the disc tray from
the opening on-screen display. Use the CUR-
SOR
7
buttons / to move to ,
then press ENTER.
NOTE: When loading a disc in the tray,
be sure to center the disc in the tray recess.
Otherwise, the disc may be damaged
when the tray is closed, and the disc may
not be removed from the unit. Do not use
any stabilizer when playing back a disc.