Filter
Top Products
7 English
Composite Input TV Connection
Connect the COMPOSITE VIDEO output
to the composite video input of your TV. Con-
nect the ANALOG AUDIO
outputs to the
audio inputs of your TV. A cable for these
connections is supplied.
If your TV has a single monaural audio input
instead of a pair of stereo inputs, you need
to use a “Y” cable adapter to connect the two
output channels of the RDV-985 to the single
input.
You can improve the sound quality of the
system by connecting the audio outputs to a
separate hi-fi audio system. (See the follow-
ing section.)
If your TV has an S-video input, you should
connect it with the S-VIDEO
output of
RDV-985 using the supplied S-video cable in
addition to the standard video cables. This will
produce better picture quality.
COMPSITE S VIDEO
LEFT
PAL NTSC
COMPONENT
RIGHT
ANALOG
OUTPUT
DIGITAL
OUTPUT
PCM/STREAM
OPTICAL
VIDEO OUT
YP
B
P
R
Audio/video cable
(supplied)
S-video cable
(supplied)
TV
White
Red
Yellow
Red
White
Yellow
VIDEO
AUDIO
RIGHT
LEFT
IN
S-VIDEO
COMPSITE S VIDEO
LEFT
PAL NTSC
COMPONENT
RIGHT
ANALOG
OUTPUT
DIGITAL
OUTPUT
PCM/STREAM
OPTICAL
VIDEO OUT
YP
B
P
R
S-video cable
(supplied)
TV
VIDEO
AUDIO
RIGHT
YP
B
P
R
LEFT
IN
IN
S-VIDEO
Audio Cable
(not supplied)
White
Red
Red
White
Component video
cable (not supplied)
Red
Green
Blue
Red
Green
Blue
Component Input TV Connection
If your TV has component video signal input
jacks you will get better video performance
by using the COMPONENT VIDEO
out-
put jacks of the RDV-985. The required cable
is not provided. Be sure to connect the “Y”
output to the “Y” input, “P
B” output to the “PB”
input, and the “P
R” output to the “PR” input.
If your TV has an S-video input, you should
connect it with the S-VIDEO
output of
RDV-985 using the supplied S-video cable in
addition to the standard video cables. This will
produce better picture quality.
NOTE: If you do not connect the S-Video
cable between the two components some
functions of your TV may not work.
You can improve the sound quality of the
system by connecting the audio outputs to a
separate hi-fi audio system. (See the follow-
ing section.)
NOTE: The component signal inputs on
some TV’s have BNC type connectors.
(BNC connectors are coaxial connectors
that have keyed locking collars.) In such in-
stances adapters or a special cable may be
needed.␣