Filter
Top Products
8-2
Messages, Warnings, and Failures
WARNING:
invalid
frequency input
The entered frequency or
applied frequency of the
source is out of the
projector's range.
FAILURE
RWI communication
error
Hardware failure. Call a
qualified service technician.
WARNING:
default
settings loaded in the
E2PROM
Adjustment settings are lost.
Re load using Projector
Control Soft ware via PC or
MAC (if this option is
available), or readjust
image.
FAILURE
EYE-Q communication
error
Communication error between
EYE-Q and the projector.
Call a qualified service
technician.
table is
deleted
Message to inform that
selected table is deleted.
This message will be
followed by
`confirm
message?,
on which the user
has to answer.
WAIT
starting
up EYE-Q
Message during the start up
of the EYE-Q. Message will
disappear when the EYE-Q
is ready to accept commands.
FAILURE
invalid RWI soft
version
Wrong software version in
your projector. Call for
technical sup port.
FAILURE
1
2
C error
addr. : 7FH3
Hardware failure. Call a
qualified service technician
for repair.
FAILURE
short
circuit on 1
2
C bus
Hardware failure. Call a
qualified service technician
for repair.