Filter
Top Products
APP-3
APPENDIX 1
2
4
718
4
4
4421
STX Offest ADRe CMDe DATle DAT2e DAT3e DAT4e CHKSe
Always 2
Wake up projo
You choose offset. This is added to the
rest of the bytes so that none of them equal
2 which would make the projector think its
being told to wake up again. Normally
this is 0. It is set to 4 in this working example
to show how it affects the value of the rest
of the bytes.
Address of
projector plus
offset.
Command plus offset.
(14+4)
Optional data bytes plus
offset. No data needs to be
sent to turn on projector
therefore these are equal to
zero and offset is then
added.
Add bytes from ADR to DAT4, keep 2
right most digits, then add offset.
(3+14+0+0+0+0)+4=CHKSe
Example string to send to the projector with address 3 to turn it on/off
In decimal values
ENTER 07h (7) Enter button CUR_UP 21h (33) Cursor up
EXIT 08h (8) Exit button CUR_DN 22h (34) Cursor down
ADJUST 09h (9) Adjust button CUR_RI 23h (35) Cursor right
TEXT 0Dh (13) Menus On/Off CUR_LE 24h (36) Cursor left
STDBY 0Eh (14) Power On/Off CON_UP 28h (37) Contrast +
NUM_0 10h (16) CON_DN 29h (38) Contrast -
NUM_1 11h (17) BRI_UP 2Ah (42) Brightness +
NUM_2 12h (18) BRI_DN 2Bh (43) Brightness -
NUM_3 13h (19) SAT_UP 2Ch (44) Color +
NUM_4 14h (20) SAT_DN 2Dh (45) Color -
NUM_5 15h (21) HUE_UP 2Eh (46) Tint +
NUM_6 16h (22) HUE_DN 2Fh (47) Tint -
NUM_7 17h (23) SHA_UP 36h (54) Sharpness +
NUM_8 18h (24) SHA_DN 37h (55) Sharpness -
NUM_9 19h (25)
Numeric
Keypad
*
*
The STDBY is a toggle for power ON/Off. If discreet
Power On of Power Off commands are necessary please
see the chart of example strings.
Transmitting the following codes is the same as using the keys of the IR remote.
COMMAND CODE LIST
*
Decimal Value in ( ).