Filter
Top Products
EYE-Q
TM
SETUP
The EYE-Q
TM
SETUP procedure needs to be done only once
after projector is correctly installed or whenever the projector
is reinstalled in another position.
To enter the EYE-Q
TM
SETUP menu:
Highlight EYE-Q
TM
by pushing the or keys of the
control disc.
Press the <ENTER> button to set the correct projector
configuration.
Setting the Configuration
When using a rear screen projector, this option must be set
to rear. Follow the steps described below to set the right con-
figuration:
Highlight FRONT (or REAR) by pushing the
or keys
of the control disc.
Press the <ENTER> button to set the correct projector
configuration.
The EYE-Q
TM
SETUP menu provides you with easy to use
methods to focus the camera lens and to center the camera.
Please pay attention while doing it, as a properly
focused camera lens and correctly centered camera are
prerequisites for a perfect automatic convergence.
APX-4
Appendix 2
EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with
then <ENTER>.
<EXIT> to return
or
EYE-Q SETUP
FOCUS THE LENS
CENTER THE CAMERA
CONFIGURATION: rear/front
LEARN REFERENCE
TOUCH-UP OPTIONS:
Select with
then <ENTER>.
<EXIT> to return
or
TM