14
Audio Output
You can choose to send the player’s audio signals to an
external receiver using the following outputs:
1 Analog: Audio signals are sent using Dolby Digital 5.1
channel audio terminals (5.1ch model Only) and
stereo audio terminals. Selecting this choice will
disable the digital audio outputs.
1 Digital: Audio signals are sent using the optical output
and the coaxial output. Selecting this choice will
disable the analog outputs.
Video Output
1 The unit has two video output choices, Y/Cb/Cr
Component video and S-video. If you are using
component video outputs, please set this setting to
“Y/CB/CR”. If you are using S-Video output, please
set this setting to “S-Video”. If you are using composite
video outputs, you can ignore this setting.
i Component video output and S-Video output can not
be used simultaneously.
SCART Out (Euro Model Only)
This DVD player has only one SCART terminal but
supports three different types of video output from this
terminal. They are composite video, RGB video, and
S-video, which are dedicated by setting SCART OUT at
"COMPOSITE", "RGB", and "S-VIDEO", respectively.
CAPTIONS (Closed Captioning)
If a DVD box contains a CC mark, you can set Closed
Captioning to “ON” and read written captions on the TV
screen. You must also have a TV that supports the caption
function and have the function turned on.
Screen Saver
When this DVD player is idle (after about 5 minutes of
inactivity), the screen saver can be enabled to prolong the
TV monitor’s life.
-- GENERAL PAGE --
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
AUDIO OUTPUT >> ANALOG
VIDEO OUT DIGITAL
SCART OUT
CAPTIONS
SCREEN SAVER
SELECT AUDIO OUTPUT
-- GENERAL PAGE --
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
AUDIO OUTPUT
VIDEO OUT >> S-VIDEO
SCART OUT Y/CB/CR
CAPTIONS
SCREEN SAVER
SET VIDEO OUTPUT TYPE
-- GENERAL PAGE --
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
AUDIO OUTPUT
VIDEO OUT
SCART OUT
CAPTIONS >> ON
SCREEN SAVER OFF
--GENERAL PAGE--
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
AUDIO OUTPUT
VIDEO OUT
SCART OUT >> COMPOSITE
CAPTIONS RGB
SCREEN SAVER S-VIDEO
SET SCART OUTPUT TYPE