Sampo DVE-6xx DVD Player User Manual


 
20
ON-SCREEN DISPLAY (OSD)
p DVD OSD modes
There are 3 OSD display modes available when playing a
DVD disc. You can toggle the OSD mode setting by
pressing the DISPLAY button.
1 Mode 1 - Shows the status of the pressed button and
some special messages are displayed. The OSD
message displays for three seconds. For example,
when the OPEN/CLOSE button is pressed, the OSD is:
1 Mode 2 - Only title number, chapter number, and
elapsed time are displayed as shown below:
1 Mode 3 - Title number, chapter number, information
about the sub-title and the audio, and elapsed time are
all displayed as shown below:
p CD/VCD OSD Modes
When playing a CD or a VCD disc, OSD modes available
are:
When PBC (Playback Control) is ON (VCD Only):
1 OFF mode only displays the function status of the
pressed button or some messages.
1 SINGLE ELAPSED mode displays elapsed time of
the playback soundtrack.
1 SINGLE REMAIN mode displays remaining time
of the playback soundtrack.
When PBC (Playback Control) is OFF or during audio
CD playback:
1 OFF mode only displays the function status of the
pressed button or some messages.
1 SINGLE ELAPSED mode displays elapsed time of
the playback soundtrack.
1 SINGLE REMAIN mode displays remaining time
of the playback soundtrack.
1 TOTAL ELAPSED mode displays elapsed time of
all discs.
1 TOTAL REMAIN mode displays remaining time of
all discs.
The mode is displayed in the left top corner. Time is
displayed in the left bottom screen corner as shown below:
TITLE 002/04 CHAPTER 02/05
SUBTITLE 01/06:ENGLISH
AUDIO 1/4:AC-3 2CH ENGLISH
TIME 00:10:00
TITLE 002/04 CHAPTER 02/05
TIME 00:10:00
OPEN
TOTAL REMAIN
TIME 00:10:00