Filter
Top Products
15
p Speaker Setup (2ch Model Only)
You can set the analog audio output in PRO-LOGIC or
STEREO mode. If you have a PRO-LOGIC surround sound
receiver or pre-amplifier, please select this option for best
sound quality.
p Speaker Setup (5.1ch Model Only)
This setting is only available for 5.1ch model with analog
Dolby Digital AC-3 5.1channel audio outputs. All the
settings are dependent on the number of speakers you
have. For example, if you have no center speaker in your
AV system, set CNTR SPEAKER to “OFF.” The DVD player
will down-mix the disabled audio channels into the other
audio channels according to the Dolby AC-3 decoding rule.
Center Speaker
Enables/Disables the center channel output. “ON” means
“enable output” and “OFF” means “disable output.”
Rear Speaker
Enables/Disables the surround channels output.
Subwoofer
Enables/Disables the subwoofer channel output. This
setting also controls the bass management of Dolby Digital.
1 When SUBWOOFER is “ON,” the bass of all the other
channels will be redirected to the Subwoofer speaker.
1 When SUBWOOFER is “OFF,” all the bass signals will
be redirected to the front L/R channels.
-- GENERAL PAGE --
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
AUDIO OUTPUT
VIDEO OUT
SCART OUT
CAPTIONS
SCREEN SAVER >> ON
OFF
SCREEN SAVER
-- SPEAKER SETUP PAGE --
CNTR SPEAKER >>ON
REAR SPEAKER OFF
SUBWOOFER
CNTR DELAY
REAR DELAY
3MAIN PAGE
LOUD SPEAKER SETUP
-- SPEAKER SETUP PAGE --
CNTR SPEAKER >> ON
REAR SPEAKER OFF
SUBWOOFER
CNTR DELAY
REAR DELAY
3MAIN PAGE
CENTER SPEAKER ON
-- SPEAKER SETUP PAGE --
CNTR SPEAKER
REAR SPEAKER >> ON
SUBWOOFER OFF
CNTR DELAY
REAR DELAY
3MAIN PAGE
SETUP REAR/SURROUND SPEAKERS
-- SPEAKER SETUP PAGE --
CNTR SPEAKER
REAR SPEAKER
SUBWOOFER >> ON
CNTR DELAY OFF
REAR DELAY
3MAIN PAGE
SUBWOOFER ON/OFF
--SPEAKER SETUP PAGE --
FRONT SPEAKER>> PROLOGIC
STEREO
3MAIN PAGE
LOUD SPEAKER SETUP