Samsung 51CH Blu-ray Player User Manual


 
English 21
|
04 Settings
Settings
Display
Audio
Network
System
Language
Security
General
Support
Wired Network Settings
Internet Protocol Setup : Manual \
IP Address :
0
0
0
0
Subnet Mask :
255
255
255
0
Gateway :
0
0
0
0
DNS : Manual
DNS Server :
0
0
0
0
>
Move
"
Select '
Return
1.
Follow the first four steps in the Automatic
procedure, but select Manual instead of Auto in
Step 4.
2.
Press the
button to go to the first entry field (IP
Address).
3.
Use the number buttons on your remote to enter
numbers.
4.
When done with each field, use the ► button to
move successively to the next field.
You can also use the other arrow buttons to move
up, down, and back.
5.
Enter the IP Address, Subnet Mask, and Gateway
values.
6.
Press the ▼ button to go to DNS.
7.
Press the ▼ button to go to the first DNS entry field.
Enter the numbers as above.
8.
Press the RETURN (
'
) button on your remote.
9.
Select Network Test, and then press
E
. When the
test is completed, press the RETURN (
'
) button to
exit to the previous screen.
10.
Select Network Status, and then press
E
.
11.
The Network Status screen appears.
The product verifies the network connection and
then connects to the network. When it is done,
highlight OK, and then press
E
.
Upgrading Software
The Software Upgrade menu allows you to upgrade the
product’s software for performance improvements or
additional services.
• Never turn the product off or back on manually
during the update process.
1.
In the Home menu, select Settings, and then press
the
E
button.
2.
Select Support, and then press the
E
button.
3.
Select Software Upgrade, and then press the
E
button.
4.
Select one of the following methods:
By Online
By USB
Auto Upgrade Notification
5.
Press the
E
button.
Directions for each method begin below.
| NOTES |
\
The update is complete when the product turns off
after restarting. Press the POWER button to turn
on the updated product for your use. Never turn the
product on or off manually during the update process.
\
Samsung Electronics takes no legal responsibility for
product malfunction caused by an unstable Internet
connection or consumer negligence during a software
upgrade.
\
If you want to cancel the upgrade while the upgrade
software is downloading, press the
E
button.
By Online
Your product must be connected to the Internet to use
the By Online function. Remove all discs before you
begin.
1.
Select By Online, and then press the
E
button.
The Connecting to Server message appears.
2.
If an update is available, a popup message appears
asking if you want to upgrade. If you select Yes, the
product turns off automatically, turns on, and then
begins the upgrade.
| IMPORTANT |
\
Never turn the home theater on or off manually during
a software upgrade.
3.
The update progress popup appears. When
the update is completed, the product turns off
automatically again.
4.
Press the POWER button to turn on the product.
| NOTES |
\
The update is complete when the product turns off
after restarting. Press the POWER button to turn on
the updated product for your use.
\
Never turn the product off or on manually during the
update process.
\
Samsung Electronics takes no legal responsibility for
a product malfunction caused by an unstable internet
connection or consumer negligence during software
upgrade.
By USB
1.
Visit www.samsung.com.
2.
Click SUPPORT on the top right of the page.