21
English
03 Basic Features
Preferred Language
(digital channels only)
Digital-TV broadcasts are capable of simultaneous
transmission of many audio tracks (for example,
simultaneous translations of the program into foreign
languages).
You can only select a language among the ones being
✎
broadcasted.
Multi-Track Sound (MTS)
t
(analog channels only)
Mono ■ : Choose for channels that are broadcasting in
mono or if you are having difficulty receiving a stereo
signal.
Stereo ■ : Choose for channels that are broadcasting in
stereo.
SAP ■ : Choose to listen to the Separate Audio Program,
which is usually a foreign-language translation.
Depending on the particular program being
✎
broadcasted, you can listen to Mono, Stereo or SAP.
Auto Volume (Off / Normal / Night)
To equalize the volume level on each channel, set to Normal.
Night ■ : This mode provides an improved sound
experience compared to Normal mode, making almost
no noise. It is useful at night.
Speaker Select
(External Speaker / TV Speaker)
A sound echo may occur due to a difference in decoding
speed between the main speaker and the audio receiver. In
this case, set the TV to External Speaker.
When
✎
Speaker Select is set to External Speaker, the
volume and MUTE buttons will not operate and the
sound settings will be limited.
When
✎
Speaker Select is set to External Speaker, you
should use these settings.
TV Speaker: Off, External Speaker: On
x
When
✎
Speaker Select is set to TV Speaker, you
should use these settings.
TV Speaker: On, External Speaker: On
x
If there is no video signal, both speakers will be mute.
✎
SPDIF Output
SPDIF (Sony Philips Digital Interface) is used to provide digital
sound, reducing interference going to speakers and various
digital devices such as a DVD player.
Audio Format ■ : During the reception of a digital TV
broadcast, you can select the Digital Audio output
(SPDIF) format from the options PCM or Dolby Digital.
By connecting to 5.1ch speakers in a dolby
✎
digital setup, maximize your interactive 3D sound
experience.
Audio Delay ■ : Correct audio-video mismatch, when
watching TV or video, and listening to digital audio
output using an external device such as an AV receiver
(0ms ~ 250ms).
Sound Reset(OK / Cancel)
Reset all sound settings to the factory defaults.
Setup Menu
Setting the Time ¦
MENU
O m
→ Setup → Time → ENTER
E
Time
The current time will appear every time you press the
✎
INFO button.
Clock ■ : Setting the clock is for using various timer
features of the TV.
If you disconnect the power cord, you have to set
✎
the clock again.
Clock Mode: Set up the current time manually or
automatically.
Auto – : Set the current time automatically using the
time from a digital channel.
The antenna must be connected in order to set
✎
the time automatically.
Manual – : Set the current time manually.
Depending on the broadcast station and signal,
✎
the auto time set up may not be correct. In this
case, set the time manually.
Clock Set: Set the Month, Day, Year, Hour, Minute
and am/pm.
Available only when
✎
Clock Mode is set to
Manual.
You can set the month, day, year, hour and minute
✎
directly by pressing the number buttons on the
remote control.
BN68-02584A_Eng.indb 21 2010-08-31 �� 9:16:51