Filter
Top Products
21
Preparations
1
1 Preparations
Icons Description
Configure Customized Key and press [ ]. The following options will be
enabled.
z ECO - MAGIC - Image Size
To configure Customized Key, go to SETUP&RESET
Customized Key and select the mode you want.
Adjust the screen brightness.
Volume can be adjusted if a cable is connected to the [DP IN] or
[AUDIO IN] port.
Confirm a menu selection.
Pressing the [ ] button when the OSD menu is not displayed will
change the input source (Digital1/Digital2/DisplayPort). If you power on
the product or change the input source by pressing the [ ] button, a
message that shows the changed input source will appear at the top left
corner of the screen.
Move to the upper or lower menu or adjust the value for an option on the
OSD menu.
Separate the screen in half and display output from two different source
devices simultaneously on the left and right sides of the screen.
Turn the screen on or off.
Power Indicator
The power indicator will be lit when the product is operating normally.
z Refer to "9.2 PowerSaver"for details about the power-saving
function.
z To reduce power consumption, it is best to remove the power
cable when you will not be using the product for an extended
period of time.