Filter
Top Products
23 English
04 Settings
|
NOTE
|
\
To view the password as you enter it, use the arrow
buttons to select Show Password on the right side,
and then press
v
button.
7. When finished, select Done and then press
the
v
button. The product verifies the
network connection and then connects to
the network.
8. When verification is complete, select OK,
and then press the
v
button.
|
NOTE |
\
You should be able to find the Security Code or Pass
Phrase on one of the set up screens you used to set
up your router or modem.
Ğ
Wireless - Manual
If you have a static IP address or the Automatic
procedure does not work, you'll need to set
the Network Settings values manually.
1. Follow the directions in Wireless -
Automatic through Step 5.
2. The product searches for a network,
and then displays the connection failed
message.
3. On the bottom of the screen, select IP
Settings, and then press the
v
button.
The IP Settings screen appears.
4. Select the IP Setting field, and then press
the
v
button.
5. Select Enter manually in the IP Setting
field, and then press the
v
button.
6. Select a value to enter (IP Address, for
example), and then press
v
button.
Use the number keypad on your remote
control to enter the numbers for the value.
You can also enter numbers using the
▲▼ buttons. Use the ◀▶ buttons on the
remote control to move from entry field
to entry field within a value. When done
with one value, press the
v
button.
7. Press the ▲ or ▼ button to move to
another value, and then enter the
numbers for that value following the
instructions in Step 6.
8. Repeat Steps 6 and 7 until you have filled
in all values.
|
NOTE |
\
You can get the Network values from your Internet
provider.
9. When finished, select OK, and then
press the
v
button. The Security Screen
appears.
10. On the Security screen, enter your
network's Security Code or Pass Phrase.
Enter numbers directly using the number
buttons on your remote control. Enter
letters by selecting a letter with the
▲▼◀▶ buttons, and then pressing the
v
button.
11. When finished, select Done at the right of
the screen, and then press the
v
button.
The product verifies the network connection
and then connects to the network.
12. After the product verifies the network,
select OK, and then press the
v
button.
Ğ
WPS(PBC)
1. In the Home screen, select Settings, and
then press the
v
button.
2. Select Network, and then press the
v
button.
3. Select Network Settings, and then press
the
v
button.
4. Select Wireless in the Network Settings
screen, and then press the
v
button.
5. Press the ▲ button on your remote, and
then press the ▶ button to select the
WPS(PBC).
6. Press the
v
button on your remote. The
"Press the PBC button on your wireless
router within the next two minutes."
message appears.
7.
Press the WPS(PBC) button on your
router within two minutes. Your product
automatically acquires all the network
settings values it needs and connects to
your network.
The Network Status screen appears. The
product connects to the network after the
network connection is verified.