Samsung BN68-00990V-03 Flat Panel Television User Manual


 
English - 30
1 After switching the mode to WISELINK, select a memory device that you
have installed. (Refer to page 29)
2 Press the œ or button to select Photo, then press the ENTER ()
button. JPEG files and existing folders are displayed.
3 Press the
/
/
œ
/
buttons to select a file, then press the ENTER ()
button.
Pressing the button over a photo icon displays the currently selected
photo in full screen. However, JPEG files smaller than 640x480 pixels
are zoomed-in at 4 times their original size.
(e.g. If a photo’s original size is 200x200 pixels It is displayed at
800x800 pixels)
Press the INFO () button and select View to view a photo image at
its original size.
Pressing the button over a folder icon shows the JPEG files included in
the folder.
While a full screen is displayed, œ
/
buttons will let you see another
photo image in the same folder.
Press the PLAY/PAUSE () button when a Photo icon is selected to
start a Slide Show.
To exit WISELINK mode, press the WISELINK button on the remote control.
Moving to a photo may take a few seconds because the file needs to
be loaded. At this point, the icon will appear.
This menu shows only the files whose extension is jpeg (or jpg). Files
with other formats such as gif or tiff will not be displayed.
Fifteen thumbnail photos are displayed per page.
The thumbnails are numbered from left to right and from top to bottom,
from 1 to 15.
Folders are displayed first and they are followed by all JPEG files in the
current folder. The folders and JPEG files are sorted in alphabetical
order.
If the photo is displayed in full screen, you can zoom in and out or
rotate the photo on the screen. (Refer to pages 34~35)
It takes a while to show JPEG files as thumbnail images.
WISELINK for this product supports JPEG files up to 8K x 8K pixels.
For progressive JPEG files or files whose size exceeds 8MB, the photo
will be displayed as a thumbnail only. When trying to view a progressive
JPEG file, the “Not supported mode” message will appear.
When trying to view a file exceeding 8MB, the “This file is too
large to decode” message will appear.
Using the Photo (JPEG) List
You can play back the JPEG files saved on a memory device in various ways.
Move Enter Return
Move Enter Photo Menu Return
219x171
6 KBytes
May 05,2006
3/130
: Folder icon
: Photo icon
: Move to the previous folder
stage icon
continued...
œœ
1/10 Page
√√
Press the WISELINK button on the remote control to turn on the WISELINK
mode.
BN68-00990V-03Eng_0824 8/26/06 4:25 PM Page 30