Filter
Top Products
Picture Options
MENU _ _ Picture -_ Picture Options
ENTER IZ_
ColorTone :Normal I_I
Size :16"9
DigitalNoiseFilter :Auto
FilmMode :Off
III Color Tone (Cool / Normal / Warm1 / Warm2)
Warm1 or Warm2 will be activated when the
picture mode is Movie.
Settings can be adjusted and stored for each
external device connected to an input on the TV.
III Size: Your cable box/satellite receiver
may have its own set of screen sizes as
well. However, we highly recommend
you use 16:9 mode most of the time.
16:9: Sets the picture to 16:9 wide
mode.
Zoom1 : Usefor moderate magnification.
Zoom2: Use for a stronger magnification.
Wide Fit: Enlarges the aspect ratio of the picture to fit
the entire screen.
4:3: Sets the picture to basic (4:3)mode.
Do not watch in 4:3 format for a long time. Traces
of borders displayed on the left, right and center
of the screen may cause image retention (screen
burn)which are not covered bythe warranty.
Screen Fit: Displaysthe full image without any cut-off
when HDMI (720p / 1080i/1080p) or Component
(1080i/ 1080p) signals are input.
NOTE
* After selecting Zoom1, Zoom2 or Wide Fit:
1. Pressthe !_ button to select Position.
2. Pressthe ENTERIZ_ button.
3. Pressthe • or T button to move the picture up
or down.
4. Pressthe ENTERIZ_ button.
5. Pressthe I_ button to select Reset,
6. Pressthe ENTER _ button to resetthe picture
to its default position.
* HD (High Definition): 16:9 - 1080i/1080p (1920x1080),
720p (1280x720)
* Settings can be adjusted and stored for each
external device you have connected to an input on
the TV.
III Digital Noise Filter (Off / Low / Medium / High /
Auto): Ifthe broadcast signal received byyour TV is
weak, you can activate the Digital Noise Filter feature
to reduce any static and ghosting that mayappear on
the screen.
When the signal is weak, try other options until the
best picture is displayed,
III HDMI Black Level (Low / Normal): Selects the black
levelon the screen to adjust the screen depth,
Available only in HDMI mode (RGBsignals).
III Film Mode (Off / Auto): Sets the TV to automatically
sense and process film signals from all sources and
adjusts the picture for optimum quality,
Available inATV, DTV(interlace), AV,COMPONENT
(480i/1080i) and HDMI (1080i),
Picture Reset
(Reset Picture Mode / Cancel)
Resets your current picture mode to it's default settings.
III Reset Picture Mode: Returns all picture values in the
currently selected mode to the default settings.
English 15