Filter
Top Products
66
Connecting and Using a Source Device
2
2 Connecting and Using a Source Device
2.5 Connecting the network box (Sold separately)
2.5.1 MagicInfo
To use MagicInfo, a network box (sold separately) must be connected to the product.
For details on how to connect to a network box, refer to the user's manual provided with the network
box upon purchase.
To change the MagicInfo settings, run "MagicinfoSetupWizard" on the desktop.
For details on how to use MagicInfo, refer to the DVD provided with the network box.
The information in this section is subject to change without notice for quality improvement.
If a problem occurs after installing an operating system other than the one provided with the
network box, restoring the previous version of the operating system, or installing software that is
not compatible with the operating system provided, you will not be able to benefit from technical
support and will be charged a fee for a visit from a service technician. A product exchange or
refund will also not be available.
Entering MagicInfo mode
1 After installing and connecting the network box (sold separately) to the product, power on the
product.
2 Press SOURCE on the remote control, and select MagicInfo.
Connecting the network box to the [HDMI IN] port on the product will change Source from HDMI
to MagicInfo.