Filter
Top Products
English
- 41
Playing Back
Using the Tape Counter
The tape counter:
• Indicates the elapsed time in the play and record
modes (hours, minutes and seconds)
• Is reset when a cassette is inserted in the DVD-VCR
• Allows you to find the beginning of a sequence easily
• If the remaining time is to be calculated correctly, you
must indicate the type of cassette being used.
1
Insert a cassette in your DVD-VCR.
To set the tape counter to zero at the beginning of
a sequence:
• Press the INFO. button twice to display the
counter
• Press the CLEAR button when you want to set
the tape counter to zero
2
When you are ready,
•Start playback or Recording.
• Press the
■
button.
• To fast-froward or rewind to the sequence at
which the counter was set to zero, press the
œœ or √√ button.
• Some DVD-VCR information, such as the
counter, can be displayed on the television
screen (unless you have deactivated the
Screen Messages mode; refer to page 27).
Press the INFO. button:
• Once to display the current function, programme
number, recording speed, date, time and counter
• Twice to display the counter only
• Three times to display the time remaining on the
cassette
• Four times to clear the display
0:00:00