Filter
Top Products
❚
Progressive Scan
If the TV connected supports Progressive Scan, press
the P.SCAN button on the front panel in stop mode.
• The Progressive Scan feature is only available
for DVD. Activate it in DVD Stop mode.
• The message “Press OK to confirm Progressive
scan mode. Otherwise press RETURN.” will be
displayed. If you want Progressive scan mode,
select OK. Make sure that the disc has stopped
completely before changing the mode.
• To cancel the progressive scan mode, press the
P.SCAN button in stop mode.
• Make sure that the colour coded connections match.
That is, the Y, Pb and Pr component output jacks of
your DVD -VCR should be connected to the exact
corresponding component input jacks on your TV.
Otherwise, red or blue images will be displayed on
the TV screen.
14 -
English
Démarrer
Digital Audio out
Jack
AV Receiver
Connections
To take full advantage of the movie theater experience
that DVD offers, you may want to connect your DVD-
VCR to a complete Surround Sound system, including
an A/V Receiver and six Surround Sound speakers.
If your A/V receiver is equipped with a Dolby Digital
Decoder, you have the option to bypass the DVD-VCR’s
built-in Dolby Digital Decoder. Use the Digital Audio Out
connection below.
1
Connect a Digital Audio coaxial cable from the
Digital Audio Out jacks on the panel of the DVD-
VCR to their corresponding Digital Audio Input
jacks on your A/V Receiver:
To Digital Audio Input of an A/V
Receiver with a Dolby, MPEG2, DTS,
Digital Decoder
If your TV does not have Progressive scan
mode, there will be no signal on the screen.
If you press the P.SCAN button, it will be
changed to Interlace scan mode.
See your TV User’s Manual to find out if
your TV supports Progressive Scan.
If Progressive Scan is supported, follow the
TV User’s instructions regarding
Progressive Scan settings in the TV’s menu
system.
Depending on your TV, the method of
connection may differ from the illustration
above.
What is "Progressive Scan"?
Progressive scan has twice as many
scanning lines as the interlace output
method has. Progressive scanning method
can provide better and clearer picture
quality.
You must connect the player to the
component(s) before using the Progressive
Scan feature.
Use the Component Video connection
method only for the DVD.
NTSC DVD disk is not supported.
Note