Samsung DVD-V6500 DVD Player User Manual


 
32 -
English
VCR Functions
Using the ShowView
Feature
(DVD-V6400/DVD-V6500)
Before presetting your DVD-VCR:
• Switch on both the television and your DVD-VCR
• Check that the date and time are correct
Insert the cassette on which the programme is to be
recorded (safety tab intact)
Up to six programmes can be preset.
1
Press the MENU button, then press the or
button to select PROG, then press the OK or
button.
The Timer Method menu is displayed.
2
Press the or button to select ShowView,
then press the OK or button.
• It can be displayed simply by pressing the
TIMER button on the remote control.
The Clock Settings menu will appear if the
time was not set on the first run.
SETUP
DVD
VCR
PROG
FUNC
Timer Method
Standard
ShowView
OK RETURN MENU
SETUP
DVD
VCR
PROG
FUNC
Timer Method
Standard
ShowView
OK RETURN MENU
Note
3
A message is displayed to allow you to enter the
ShowView code.
• If all six programmes have been set, the message
Timer is full is displayed. Refer to page 36 if you
wish to cancel a preset recording.
4
Press the number buttons to enter the code
opposite the programme that you wish to record in
your television magazine.
• If you wish to correct the ShowView code that
you are entering:
- Press the œ button until the number to be
corrected is cleared.
- Enter the correct number.
5
Press the OK button.
The information concerning the programme is
displayed.
• When using the ShowView function for the first
time with stored stations, the programme
number flashes. This one time, you must enter
the station number manually by pressing the
or button.
For more details, please refer to page 33.
SETUP
DVD
VCR
PROG
FUNC
ShowView
Code - - - - - - - - -
Code : 09
Correct :
œœ
OK RETURN MENU
::
::
::
::
::
::
PR Day Start Stop Speed V/P
01 SA 01 13 : 25 19 : 57 SP Off
OK RETURN MENU