Filter
Top Products
57
1
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
2
Press the UP or DOWN button to select “Auto
Volume”.
3
Press the LEFT or RIGHT button to select “On”.
•Pressing the LEFT or RIGHT button will alternate
between “On” and “Off.”
4
Press the MENU button to exit.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Custom
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Mono
On
Off
56
Choosing a Multi-Channel Sound (MTS)
Soundtrack
Depending on the particular program being broadcast, you can listen to stereo, mono,
or a Separate Audio Program. (SAP audio is usually a foreign-language translation.
Sometimes SAP has unrelated information like news or weather.)
1
Press the MENU button. Press the UP or DOWN
button to select “Sound”, then press the ENTER
button.
2
Press the UP or DOWN button to select “MTS”.
3
Press the LEFT or RIGHT button to select “Mono”,
“Stereo” or “SAP”.
4
Press the MENU button to exit.
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Custom
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Mono
Off
Off
Sound
Mode
Adjust
MTS
Auto Volume
Dolby Virtual
Woofer
Move Select Menu
Standard
Stereo
Off
Off
• Choose
Stereo
Stereo for channels that are broadcasting in stereo.
• Choose
Mono
Mono for channels that are broadcasting in mono, or if you are having difficulty receiving
a stereo signal.
• Choose
SAP
SAP to listen to the Separate Audio Program, which is usually a foreign-language translation.
Note
• The MTS function operates in TV mode only.
Using the Auto Volume
Each broadcasting station has its own signal conditions, which can make it necessary to
adjust the volume every time the channel is changed. “Auto volume” lets you automatically
adjust the volume of the desired channel by lowering the sound output when the modula-
tion signal is high or by raising the sound output when the modulation signal is low.
➤
➤
Quick way to access the MTS menu: Just press the “MTS” button on
the remote control.