Filter
Top Products
Turning the PDP On and Off
30 31
Turning the PDP On and Off
Press the Power button on the remote control.
The PDP will be turned on and you will be ready to use it’s
features.
You can also use the POWER( ) button on the front of the
PDP.
Notes:
• If your PDP isn’t turned on when the power button is
pressed: Press the
MODE
button to check if the TV mode
has been chosen ( ).
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on the PDP screen. This system makes it con-
venient and fast to use features on the PDP. Your PDP also lets you display the status of many of your PDP’s
features.
Viewing the Menus
1
With the power on, press the MENU button on the
remote control. The main menu appears on the screen.
The Picture menu is selected.
2
Press the UP/DOWN buttons to move items in the menu.
Press the LEFT/RIGHT buttons to display, change, or use
the selected items.
Press the ENTER ( ) button to enter items in the menu.
On screen menus disappear from the screen
automatically after about thirty seconds, or you can
press the EXIT button on your remote control to exit
the menu.
Picture
Mode
Adjust
Color Tone
DNIe
Move Enter Menu
Custom
Normal
On
Displaying Status Information
Press the INFO button on the remote control. The PDP will
display the Picture mode, Sound mode, MTS, Signal and
Caption.
Press the INFO button on the remote control again.
The PDP will display the Clock.
Picture : Custom
Sound : Custom
MTS : Mono
Signal : Mono
Caption : Off
Ant 6
07 : 30 am