Filter
Top Products
22 23
Connecting Speakers
External speakers are sold seperately. Check with your dealer.
Speaker Audio Cable
Connect the speaker audio cable to the external speaker output jack on the PDP matching the
“+” and “-” ends of the cable with the diagram on the PDP.
How to Connect
Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
After removing the four screws on the rear of PDP.
As shown in figure, insert the loop on a speaker into the groove on the PDP.
Clamp the speaker and the PDP together and fasten the screws.
Connecting PDP and Speakers
1
2
3
4
Guide
pole
Guide
pole
✱ External speakers MUST have a power handling
capability of 10 watts minimum (impedance 8 ohm).
Speaker AudioCable
Powered Subwoofer
(Option)
Please use the speaker-built in amplified audio.
Please use the speaker-built in amplified audio.
Powered Subwoofer
(Option)
Speaker Audio Cable
✱ External speakers MUST have a power handling
capability of 10 watts minimum (impedance 8 ohm).
Speaker AudioCable
HPN5039
HPN6339
Fix the bracket onto the guide pole located on the rear of speaker and fasten the screws.
After removing the three screws on the PDP, clamp the speaker and the PDP together and
fasten the screws.
1
2
Guide
pole
Guide
pole
HPN5039
HPN6339