Filter
Top Products
English-8
You can store up to 100 channels, including those received via cable
networks. When storing channels manually, you can choose:
Whether or not to store each of the channels found.
The programme number of each stored channel which you wish to
identify.
1. Press the MENU button to display the menu.
Press the
or button to select “Channel”, then press the
ENTER button.
2. Press the or button to select “Manual Store”, then press the
ENTER button.
3. Press the ENTER button to select “Programme”.
4. To assign a programme number to a channel, find the correct number
by pressing the
or button and then press the ENTER button.
You can also set a channel number by pressing number buttons on the remote control.
5. Press the or button to select “Colour System”, then press the
ENTER button.
6. Select the colour standard required by pressing the or button,
then press the
ENTER button.
7. Press the or button to select “Sound System”, then press the
ENTER button.
8. Select the sound standard required by pressing the or button,
then press the
ENTER button.
If there is an abnormal sound or no sound, re-select the sound system required.
9. If you know the number of the channel to be stored, press the
or button to select “Channel”. Press the ENTER button.
Select
C (Air channel) or S (Cable channel) by pressing the or
button. Press the button to select channel. Select the required
number by pressing the
or button and then press the
ENTER button.
Channel mode: P (Programme mode)
C (Air channel mode)
S (Cable channel mode)
You can also set a channel number by pressing the number buttons on the remote control.
10. If you do not know the channel numbers, press the or button to
select “Search”. Press the
ENTER button.
Search by pressing the
or button and then press the
ENTER button.
11. Press the or button to select “Store”, then press the ENTER
button. Press the or button to select “OK”, then press the
ENTER button.
12. Repeat steps 3 to 11 for each channel to be stored.
Programme: Selects a program number for the channel.
Colour System: Sets the colour supporting system.
Sound System: Sets the sound supporting system.
Channel: Selects a channel.
Search: Scans for the frequency value for the channel.
Store: Saves your settings.
Storing Channels Manually
BN68-000000-00Eng.qxd 9/1/06 11:45 AM Page 8