Filter
Top Products
English-15
You can set the TV’s clock so that the current time is displayed when you
press the INFO button. You must also set the time if you wish to use the
automatic On/Off timers.
1. Press the MENU button to display the menu. Press the or button
to select “Setup”, then press the
ENTER button.
2. Press the or button to select “Time”, then press the ENTER button.
3. Press the ENTER button to select “Clock Set”.
4.
5.
Press the EXIT button to exit.
If you disconnect the power cord, you have to set the clock again.
You can also set hour and minute by pressing the number buttons on the remote control.
To...
Move to “Hour” or “Minute”
Set the “Hour” or “Minute”
Press the
ENTER button.
Press the...
or button.
or button.
Each broadcasting station has its own signal conditions, and so it is not
easy for you to adjust the volume every time the channel is changed.
This feature let you automatically adjust the volume of the desired
channel by lowering the sound output when the modulation signal is high
or by raising the sound output when the modulation signal is low.
1. Press the MENU button to display the menu. Press the or button
to select “Sound”, then press the
ENTER button.
2. Press the or button to select “Auto Volume”, then press the
ENTER button.
3. Press the or button to select “On” or “Off”.
Press the
ENTER button.
4. Press the EXIT button to exit.
Adjusting the Volume Automatically
Setting and Displaying the Current Time
BN68-000000-00Eng.qxd 9/1/06 11:45 AM Page 15