Filter
Top Products
English - 26
Setting the Film Mode
The TV can be set to automatically sense and process lm signals from all sources and
adjust the picture for optimum quality.
1. Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23)
2. Press the ▲ or ▼ button to select "Film Mode", then press the
ENTER
button.
3. Press the ▲ or ▼ button to select "Off" or "Auto", then press the
ENTER
button.
Press the
EXIT button to exit.
" Film mode" is supported in TV, VIDEO, S-VIDEO, COMPONENT(480i / 1080i)
and HDMI(480i / 1080i).
Picture Options
Color Tone : Normal ►
Size : 16:9 ►
Digital NR : Auto ►
DNle : Off ►
HDMI Black Level : Normal ►
Film Mode : Off ►
Blue Only Mode : Off ►
TV
Move Enter Return
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
TV
Move Enter Return
Off
Auto
Setting the Blue Only Mode
This function is for AV device measurement experts. This function displays the blue
signal only by removing the red and green signals from the video signal so as to provide
a Blue Filter effect that is used to adjust the Color and Tint of video equipment such as
DVD players, Home Theaters, etc.
Using this function, you can adjust the Color and Tint to preferred values appropriate to
the signal level of each video device using the Red/Green/Blue/ Cyan/Magenta/Yellow
Color Bar Patterns, without using an additional Blue Filter.
1. Follow the “Activating Picture Options” instructions numbers 1 and 2.
(Refer to page 23).
2. Press the ▲ or ▼ button to select "Blue Only Mode", then press the ENTER
button.
3. Press the ▲ or ▼ button to select "Off" or "On", then press the ENTER
button.
Press the
EXIT button to exit.
“Blue Only Mode” is available when the picture mode is set to “Movie” or
“Standard”.
Picture Options
Color Tone : Normal ►
Size : 16:9 ►
Digital NR : Auto ►
DNle : Off ►
HDMI Black Level : Normal ►
Film Mode : Off ►
Blue Only Mode : Off ►
TV
Move Enter Return
Picture Options
Color Tone : Normal
Size : 16:9
Digital NR : Auto
DNle : Off
HDMI Black Level : Normal
Film Mode : Off
Blue Only Mode : Off
TV
Move Enter Return
Off
On
Resetting the Picture Settings to the Factory Defaults
1. Press the MENU button to display the menu.
Press the ENTER
button, to select “Picture”.
2.
Press the ▲ or ▼ button to select "Reset", then press the ENTER
button.
Press the ▲ or ▼ button to select “OK” or “Cancel” then press the ENTER
button.
Press the EXIT button to exit.
Each mode can be reset.
Move Enter Return
▲ More
Detailed Settings
Picture Options
Reset : OK
PictureTV
OK
Cancel
BN68-01393L-00Eng.indd 26 2008-05-13 ¿ÀÈÄ 4:53:03