Samsung PS-42C6HD Flat Panel Television User Manual


 
English - 14
Your television has several setting options that allow you to control the picture
quality.
Contrast Brightness Sharpness Colour Tint (NTSC only)
Contrast Brightness Colour : PC Mode
Press the œ or button until you reach the optimal setting.
Colour Tone: Cool2/Cool1/Normal/Warm1/Warm2
Reset: You can return to the factory defaults picture settings.
The reset function is set for each picture mode and colour tone.
1 Press the MENU () button to display the menu.
2
Press the or button to select Picture, then press the ENTER/OK ()
button.
3 Press the ENTER/OK () button twice.
4 Select the required mode by pressing the or button, then press the ENTER/OK () button.
A
vailable modes: Dynamic, Standard, Movie, Custom
5 Select the required option by pressing the or button, then press the ENTER/OK () button.
6 When you are satisfied with your setting, press the ENTER/OK () button.
7 Press the EXIT button to exit.
Customizing the Picture Settings
Mode
Move Enter Return
Mode : Dynamic
Contrast 100
Brightness 50
Sharpness 75
Colour 55
Tint G 50 R 50
Colour Tone : Cool1
Reset
TV
Cool2
Cool1
Normal
Warm1
Warm2
Selecting the Picture Size
You can select the picture size which best corresponds to your viewing
requirements.
1 Press the MENU () button to display the menu.
2
Press the or button to select Picture, then press the ENTER/OK ()
button.
3 Press the or button to select Size, then press the ENTER/OK ()
button.
4 Select the required option by pressing the or button, then press the
ENTER/OK () button.
A
vailable options: Auto Wide, 16:9, Wide 4:3, Zoom, 4:3
Auto Wide
: Expanding and pulling up the picture from 4:3 to 16:9 ratio.
16:9
:
Sets the picture to 16:9 wide mode.
Wide 4:3
:
Magnify the size of the picture more than
4:3
.
Move the screen up/down using the or button after
selecting the by pressing the or ENTER/OK () button.
Zoom
:
Magnify the size of the picture vertically on screen.
4:3
:
Sets the picture to 4:3 normal mode.
5 Press the EXIT button to exit.
You can change the picture size simply by pressing the P.SIZE button on the remote control.
If you change the picture size when PIP is On, PIP will automatically be turned Off.
Depending on the input source, the picture size options may vary.
The items available may differ depending on the selected mode.
Positioning and Sizing the screen using Zoom
Resizing the screen using the Zoom enables the positioning and sizing of the screen to up/down direction
using the or button as well as the screen size.
Move the screen up/down using the or button after selecting the by pressing the œ or button.
Resize the screen vertically using the or button after selecting the by pressing the œ or button.
Size
Move Enter Return
Auto Wide
16:9
Wide 4:3
Zoom
4:3
TV
BN68-01293F-00Eng 7/19/07 10:36 AM Page 14