Samsung PS-42E7H Flat Panel Television User Manual


 
English - 5
The product colour and shape may vary depending on the model.
Connection Panel
Rear Panel
ˇ´
¨
ˆØ
Cable Television
Network
.
ns
or
or
Œ
Œ ANT IN VHF/UHF (75)
- 75Coaxial connector for Aerial/Cable Network.
´ Connecting external Audio Devices
- Connect RCA audio signals from the TV to an external
source, such as Audio equipment.
ˇ COMPONENT IN
- Video (Y/P
B/PR) and audio (AUDIO L/R) inputs for
Component.
¨ PC IN / AUDIO
- Connect to the video and audio output jack on your PC.
ˆ EXT 1, EXT 2
- Inputs or outputs for external devices, such as VCR,
DVD, video game device or video disc players.
Ø HDMI/DVI IN
- Connect to the HDMI jack of a device with HDMI
output. These inputs can also be used as a DVI
connection with separate analog audio inputs. An
optional HDMI/DVI cable will be necessary to make
this connection. When using the optional HDMI/DVI
adapter, the DVI analog audio inputs on your TV allow
you to receive left and right audio from your DVI
device. (Not compatible with PC)
- When connecting this product via HDMI or DVI to a
Set Top Box, DVD Player or Games Console etc,
make sure that it has been set to a compatible video
output mode as shown in the table below.
Failure to observe this may result in picture distortion,
image breakup or no picture.
- Do not attempt to connect the HDMI/DVI connector to
a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed)
DVI AUDIO IN L/R
- DVI audio outputs for external devices.
POWER IN
- Connect the supplied power cord.
SERVICE
- Connector for service only.
Supported modes for HDMI/DVI and Component
Whenever you connect an audio or video system to your set, ensure that all elements are switched off.
When connecting an external device, match the colour of the connection terminal to the cable.
HDMI/DVI 50Hz
HDMI/DVI 60Hz
Component
480i
X
X
O
480p
O
O
O
576i
X
X
O
576p
O
X
O
720p
O
O
O
1080i
O
O
O
BN68-01042A-00Eng_0316 3/16/06 9:56 AM Page 5