Filter
Top Products
16
ENG
Switching On and Off
The mains lead is attached to the rear of the PDP.
☛
If you have purchased this PDP in the United Kingdom,
refer to page 55 for further instructions on plug wiring.
1 Plug the mains lead into an appropriate socket.
➢
The main voltage is indicated on the rear of the display and
the frequency is 50 or 60Hz.
2 Press the POWER ( ) button on the front panel or remote control
to switch the display on.
➣
If your Monitor isn’t turned on when the power button is
pressed...
press the SELECT button to check if the Monitor mode has
been chosen.
Front panel
Viewing the Menus and Displays
Your PDP has a simple, easy-to-use menu system that appears on
the PDP screen. This system makes it convenient and fast to use
features on the PDP. Your PDP also lets you display the status of
many of your PDP’s features.
1 With the power on, press the Menu button on the remote control.
The main menu appears on the screen.
2 Use the joystick (up, down) button to the move items in the menu.
Use the joystick (left, right) button to display, change, or use the
selected items. Press the joystick button to enter items in the
menu. On screen menus disappear from the screen automatically
after about thirty seconds, or you can press the
Menu button on
the remote control to exit the menu.