Filter
Top Products
43
Setting the Multiple Display Control (MDC)
ENG
Move Select Exit
S E T U P
Language English
TTX Contrast
ID Setup
0 1
ID Input
Enter ID Input Number.
S E T U P
Language English
TTX Contrast
ID Setup 0 1
ID Input
- -
1 Press the Menu button.
Result:
The main menu is displayed.
2 Move the joystick up or down to select the SETUP menu and press
the joystick button.
3 Move the joystick up or down to select the Miscellaneous menu
and press the joystick button.
4 Move the joystick up or down to select the ID Setup option.
Enter ID setup number by using the joystick.
5 Move the joystick up or down to select the ID Input option.
Enter ID setup number by using the numeric buttons.
➣
To operate the multi control function, PDP1 and PDP2 should
be set in the ID Setup mode. When entering the ID Input
number of PDP1 while the PDP is set in the ID Input mode,
only PDP1 is switched to the Menu screen and you can
operate the remote control. At this time, PDP2 doesn't operate
with the remote control and displays the standby mode of ID
Input.
Installing the Multiple Display Control (MDC) (continued)
☛
Computer Requirements (Recommended)
◆ OS : Windows 95, 98, ME, 2000, XP Home, XP Professional.
◆ CPU : Pentium II
◆ RAM : 64M
◆ VGA : 800 X 600, 256 Color
◆ CD-ROM : 4X
◆ Communication Port : RS-232C Compatible Serial Male Type 9Pin (COM1).
If RS-232C port on your PC is 25-pin type, you should use the
25-pin to 9-pin male converter.
➣
The proper operation of this product will not be guaranteed when users operate this program in
other models.