Filter
Top Products
53
Broadcasting
Configure the Broadcasting settings for the product.
Chapter 06
Auto Program
MENU m → Broadcasting → Auto Program → ENTER E
Broadcasting
Auto Program
Antenna
Channel List
Guide
Schedule Manager
Edit Channel
Edit Favorites
Air
-
The displayed image may differ depending on the model.
-
Available in TV mode only.
The Auto Program function memorizes all channels that are available over the air or through your cable system and adds
them to the Channel List.
Auto Program
To start Auto Program, follow these steps:
1
Push MENU m → Broadcasting → Auto Program → ENTER E on your remote. The Auto Program screen appears.
2
On the Auto Program screen, select the source of your product signal.
―
Both
―
Air: If your product is connected to an antenna choose Air, and then press ENTER E. The product will automatically
start memorizing channels.
―
Cable: If your product is connected to a cable outlet, choose Cable, and then press ENTER E. Go to Step 3.
3
Sets Antenna using / buttons. When done, select Scan, and then press ENTER E. The product will start
memorizing channels.
―
Channel memorization can take up to 45 minutes, depending on your cable system.
―
Memorized channels are added to the Added Ch. list. These are the channels you will see when you use the channel
buttons on your remote.